Comparison
Browserbase vs Hyperbrowser: same rate, so who's cheaper?
I priced six workloads on Browserbase vs Hyperbrowser. Past the allowances, Browserbase Startup and Hyperbrowser both charge $0.10 an hour and $10 a GB.

Once the included hours run out, Browserbase and Hyperbrowser charge exactly the same: $0.10 per browser-hour and $10 per GB of proxy traffic (Browserbase Startup against any paid Hyperbrowser plan). Browserbase pricing, Hyperbrowser pricing, verified 2026-11-16.
So your decision isn’t about the headline rate. It’s about what each plan bundles, how each one meters a session, and which limits you’ll hit. I priced six monthly workloads on both from today’s list prices, found where the cheaper one flips, and set out what settles a tie.
Short on time?
Short on time? Here's my pick by situation
- Heavy browser-only work, no proxies
- Hyperbrowser
- 1,000 browser-hours is $100 on Hyperbrowser against $149 on Browserbase Startup, because half of Browserbase's $99 fee buys proxy traffic you'd never use.
- Small jobs that need CAPTCHA solving
- Browserbase Developer, $20
- CAPTCHA solving and 1 GB of residential proxy for $20. Hyperbrowser needs its $30 Startup plan for either. Cheaper up to about 183 hours a month.
- Proxy-heavy scraping at scale
- Browserbase
- A price tie ($399 vs $400 at 2,000 h + 20 GB), so the tie-breakers decide: a published 6-hour session cap, a Singapore region and proxied Fetch at $4 per 1,000 against $10.
- Thousands of sessions under a minute
- Hyperbrowser
- Browserbase bills every session at least one minute. Hyperbrowser publishes no minimum, but also no metering rule, so check the usage page on the free credits first.
- Trying one for free
- Hyperbrowser Free
- 5,000 credits is 50 browser-hours, one browser at a time. Take Browserbase Free instead if you need three browsers in parallel or its Search and Fetch allowance.
- Your agent is built on Stagehand
- Browserbase
- Stagehand is Browserbase's own MIT-licensed framework. It runs without a Browserbase account too, so this is a convenience pick, not a lock-in.
Prices verified . Sponsors cannot buy a verdict or a position.
Short answer: the bundle decides, not the rate. In the plans below, Browserbase sells hours plus proxy GB ($20 Developer, $99 Startup) while Hyperbrowser’s $30 Startup and $100 Scale plans are prepaid credits. Hyperbrowser wins browser-only work, Browserbase Developer wins small CAPTCHA jobs, and heavy proxied workloads tie ($399 against $400 at 2,000 hours and 20 GB).
Browserbase and Hyperbrowser plans side by side
Verified
| Plan | Price a month | Included | Browser-hour after | Proxy GB after | Browsers at once | Max session | Retention | CAPTCHA | Stealth |
|---|---|---|---|---|---|---|---|---|---|
| Browserbase Free | $0 | 1 browser-hour | n/a | No proxies | 3 | 15 min | 7 days | No | None |
| Browserbase Developer | $20 | 100 h + 1 GB | $0.12 | $12 | 25 | 6 h | 30 days | Yes | Basic |
| Browserbase Startup | $99 | 500 h + 5 GB | $0.10 | $10 | 100 | 6 h | 30 days | Yes | Basic |
| Browserbase Scale | Custom | 500+ h, 5+ GB | Usage-based | Usage-based | 250+ | 6+ h | 30+ days | Yes | Advanced |
| Hyperbrowser Free | $0 | 5,000 credits (50 h) | $0.10 in credits | No proxies | 1 | Not published | 7 days | No | Not stated |
| Hyperbrowser Startup | $30 | 30,000 credits ($30) | $0.10 | $10 | 25 | Not published | 30 days | Automatic | Basic |
| Hyperbrowser Scale | $100 | 100,000 credits ($100) | $0.10 | $10 | 100 | Not published | 30 days | Automatic | Basic |
| Hyperbrowser Enterprise | Custom | Custom | Volume rates | Volume rates | 1,000+ | Not published | 180+ days | Automatic | Ultra |
Source: Browserbase and Hyperbrowser pricing pages and docs, USD, monthly billing; neither vendor shows annual prices. Browserbase limits from its plans doc; Hyperbrowser rates from its pricing page and pricing reference.
This comparison sits in the agent browser hub. For Browserbase’s own plans in full detail, see my Browserbase pricing breakdown; here I keep only the rows the comparison needs.
How does each one bill you? #
Browserbase sells hours and gigabytes; Hyperbrowser sells credits that are really just dollars. The rates past the allowance end up identical, but the rules around them don’t.
Browserbase: a monthly allowance with a one-minute floor #
Developer costs $20 a month for 100 browser-hours and 1 GB of proxy traffic, then $0.12 an hour and $12 a GB. Startup costs $99 for 500 hours and 5 GB, then $0.10 an hour and $10 a GB. Pricing, plans doc, verified 2026-11-16.
Browser time is “billed by the minute”, with “a one-minute and one-MB minimum per session”. The docs don’t say which way a partial minute rounds. Plans doc.
The allowances “are allocations, not limits”: overage starts on its own, and the same page promises “No caps. No cut-offs.” I didn’t see a spend limit mentioned, so budget for overage rather than expect a stop.
Here’s the part that drives most of my verdicts. At $0.10 and $10, Startup’s $99 buys $50 of browser time plus $50 of proxy traffic, and Developer’s $20 is worth $24 at its own overage rates (my arithmetic).
If you never route through a proxy, half of Startup’s fee pays for nothing.
Hyperbrowser: credits that are dollars in disguise #
One credit is $0.001. A browser-hour is 100 credits ($0.10) and a GB of proxy traffic is 10,000 credits ($10), on every plan except Enterprise. Pricing, pricing reference, verified 2026-11-16.
Startup’s $30 is 30,000 credits, listed as “$30 in usage included each month”, and Scale’s $100 is 100,000 credits. So the plan fee is prepaid usage at the same rate as everything after it. The plan you pick changes your browser count and retention, not your price per hour.
The billing rules, from the pricing page and pricing.md:
- Plan credits reset at each renewal and don’t carry over.
- Bought credits, one-time or by auto-reload, “expire after 12 months”.
- Upgrades take effect at once and are prorated; downgrades wait for the end of the cycle.
- Free accounts must upgrade when the credits run out; Enterprise has a 14-day trial.
What’s missing is the meter. The docs give only an hourly rate, with no per-second or per-minute rule, no rounding and no per-session minimum. pricing.md. That gap matters for short sessions, as you’ll see below.
Hyperbrowser simplified its credits, not its base rate #
In December 2024 the founder wrote on Hacker News that the scale plan “includes 60K credits for $100/mo”, priced browser time at 1 credit a minute and proxies at 6 credits a MB, and added “Sorry about the confusing pricing btw!” HN.
Inside the plan, the old numbers land in the same place. 60 credits an hour at $100 per 60,000 credits is $0.10 an hour, and 6,000 credits a GB is $10 (my arithmetic, taking 1 GB as 1,000 MB).
Past the plan, the same comment priced overage credits at “~0.2c each”, which is $0.12 an hour (my arithmetic). So the unit got easier to read, the included rate didn’t move, and overage got slightly cheaper.

So who’s cheaper at your volume? #
Below the allowances, whichever bundle matches your mix of hours and gigabytes wins. Far above them, the two land within a dollar of each other. Here are six workloads, every one hypothetical and priced from list prices verified 2026-11-16 (my arithmetic, not invoices):
| Workload a month | Browserbase | Hyperbrowser | Cheaper |
|---|---|---|---|
| Small: 50 h + 1 GB residential, up to 5 browsers | $20 (Developer) | $30 (Startup) | Browserbase by $10 |
| Small, no proxy, one browser at a time | $20 (Developer) | $0 (Free) | Hyperbrowser by $20 |
| Medium: 400 h + 5 GB, up to 25 browsers | $99 (Startup) | $90 (Startup + credits) | Hyperbrowser by $9 |
| Large: 2,000 h + 20 GB, up to 100 browsers | $399 (Startup) | $400 (Scale) | Tie |
| Browser-only: 1,000 h, no proxy, up to 100 browsers | $149 (Startup) | $100 (Scale) | Hyperbrowser by $49 |
| Agent load: 5,000 h + 20 GB | $699 (Startup) | $700 (Scale) | Tie |
The small bills #
50 hours and 1 GB of residential proxy. Browserbase Developer covers both inside its 100 hours and 1 GB: $20. Hyperbrowser needs 5,000 + 10,000 = 15,000 credits, and Free can’t use proxies, so it’s Startup at $30.
The same 50 hours with no proxy, one browser at a time. Hyperbrowser Free’s 5,000 credits cover exactly 50 hours: $0. Browserbase Free has 1 hour, so you’re on Developer at $20.
The medium bill #
400 hours and 5 GB, up to 25 browsers. Browserbase Startup covers it inside 500 hours and 5 GB: $99. Developer would be $20 + 300 × $0.12 + 4 × $12 = $104.
Hyperbrowser needs 40,000 + 50,000 = 90,000 credits. Startup’s 30,000 plus 60,000 bought credits is $30 + $60 = $90, if you can top up exactly that amount (I couldn’t confirm the top-up increments). Scale at $100 covers it with 10,000 credits spare.
The large bill #
2,000 hours and 20 GB, up to 100 browsers. Browserbase Startup: $99 + 1,500 × $0.10 + 15 × $10 = $99 + $150 + $150 = $399. Hyperbrowser: 200,000 + 200,000 = 400,000 credits, so Scale’s $100 plus $300 = $400.
One quirk: on Hyperbrowser, once you’re past the plan’s credits, every plan costs the same. Startup would also total $400 here; you pay for Scale only to get 100 browsers instead of 25.
Browser-only, no proxies #
1,000 hours, up to 100 browsers. Browserbase Startup: $99 + 500 × $0.10 = $149. Hyperbrowser: 100,000 credits, exactly Scale’s $100 = $100.
If 25 browsers are enough, Browserbase Developer comes to $20 + 900 × $0.12 = $128, still $28 above Hyperbrowser. This is where Hyperbrowser’s “lower price per hour” reputation comes from, and it holds only because Browserbase’s fee bundles proxy traffic you’re not using.
The 5,000-hour agent load #
5,000 hours and 20 GB. Browserbase Startup: $99 + 4,500 × $0.10 + 15 × $10 = $699. Hyperbrowser: 500,000 + 200,000 = 700,000 credits = $700.
Those match the figures in my Browserless pricing breakdown, where the identical workload comes to $830 a month on Browserless Scale ($680 on annual billing). At this size the two vendors here are interchangeable on price.
Where does the cheaper one flip? #
At about 183 hours a month for small proxied jobs, and nowhere at all once both are past their allowances. Everything else follows from what each plan bundles.
Browserbase Developer against Hyperbrowser Startup (up to 1 GB of proxy, up to 25 browsers). Hyperbrowser stays at $30 until 200 hours, because 30,000 credits minus 10,000 for the GB leaves 200 hours.
Browserbase costs $20 + $0.12 × (hours − 100). They meet where that equals $30: at about 183 hours (my arithmetic).
Below 183 hours, Browserbase Developer is cheaper, and at 100 hours or less it’s $20 flat. Above it, Hyperbrowser pulls ahead: at 300 hours it’s $40 against $44.
What changes the answer:
- CAPTCHA solving. Hyperbrowser Free has none, so any job that needs it starts at $30 there and at $20 on Browserbase. That’s why I’d pick Browserbase Developer for small CAPTCHA-heavy work.
- Proxy-free work. With no proxy and one browser, Hyperbrowser Free covers 50 hours at $0, and above that Startup covers 300 hours for $30.
- Proxy-heavy work. If you burn Browserbase Startup’s full 5 GB and 500 hours, its $99 buys exactly $100 of usage at Hyperbrowser’s rates. That’s the tie.
- Developer overage. Developer’s $0.12 and $12 are 20% above everyone else’s $0.10 and $10, but with no proxy traffic Developer stays cheaper than Startup until roughly 2,050 browser-hours (my arithmetic). You’d move sooner only if you need more than 25 browsers. That plan-to-plan math is in the Browserbase plan-by-plan walk-through.
The short version: Hyperbrowser rewards lots of browser time and little proxy traffic; Browserbase rewards small jobs with CAPTCHAs, and bills that use both of Startup’s allowances.
What do short sessions do to the bill? #
A 20-second job bills three times its length on Browserbase, and on Hyperbrowser nobody outside the company can say. Browserbase’s one-minute minimum is published; Hyperbrowser’s metering isn’t.
Take 100,000 sessions of 20 seconds each, a month of quick checks. My arithmetic, list prices verified 2026-11-16:
| How it’s metered | Billed time | Bill |
|---|---|---|
| Browserbase, 1-minute minimum per session | 100,000 min = 1,666.7 h | $99 + 1,166.7 × $0.10 = $215.67 (Startup) |
| Hyperbrowser, if billed by the second | 2,000,000 s = 555.6 h | 55,556 credits = $55.56 |
| Hyperbrowser, if rounded up to the minute | 1,666.7 h | 166,667 credits = $166.67 |
Even in the worst case, Hyperbrowser comes out $49 lower: the part of Startup’s $99 fee that pays for proxy traffic this job never uses. In the best case it’s about a quarter of Browserbase’s bill. The gap between $55.56 and $166.67 is exactly what Hyperbrowser doesn’t publish.
That’s why my pick for sub-minute work is Hyperbrowser with a check attached. I’d run a realistic batch on the free credits and read the usage page before committing.
How to dodge the minimum on Browserbase #
Reuse sessions. Keep-alive is “only available on paid plans”, and the docs say it helps avoid the minimum charge for sessions under a minute, because one session can serve many short jobs. Keep-alive docs.
The catch is idle time. Keep-alive sessions run until you release them or they time out, and the docs warn you to “Release keep alive sessions when you’re done to avoid being charged for unused browser minutes”.
The cost guide repeats the “one-minute minimum billing period for each session creation” and points to Functions, which it says “only bill for actual execution time”. Cost guide. I couldn’t tell from the guide whether a browser opened inside a Function escapes the one-minute floor, so keep-alive is the workaround I’d count on.
Hyperbrowser has the mirror-image rule. A disconnect stops the session unless keepAlive=true, and sessions that aren’t stopped run to the team’s default timeout and can cause “unexpected charges”. Lifecycle docs.

Proxies, stealth and CAPTCHAs: who gets what? #
Both put CAPTCHA solving and proxies behind the first paid plan, and both save their strongest stealth for the custom tier. The difference is where the paid line sits: $20 on Browserbase, $30 on Hyperbrowser.
| What you get | Browserbase | Hyperbrowser |
|---|---|---|
| Proxy type | Managed residential | Residential (Startup), “Premium residential” (Scale) |
| Cheapest plan with proxies | Developer, $20 | Startup, $30 |
| Minimum per proxied session | 1 MB, then rounded to the nearest MB | Not stated |
| Targeting | Country, state and city | 100+ countries, US state or city |
| Static IPs | Scale only | Via staticIpId (plan not stated) |
| CAPTCHA solving | All paid plans | All paid plans, “Automatic” |
| Stealth | Basic on Developer and Startup; Advanced and Verified on Scale | Basic on Startup and Scale; Ultra on Enterprise |
Sources: Browserbase pricing, Browserbase proxies, Hyperbrowser pricing, Hyperbrowser proxies, parameters, verified 2026-11-16.
Browserbase’s top stealth is a separate build. Advanced Stealth launched for “Scale Plan customers” on January 17, 2025 and uses a custom Chrome build, and Verified, a purpose-built Chromium with real fingerprints, is also “on the Scale plan”; Web Bot Auth is in beta. Changelog entry, stealth docs.
On Hyperbrowser, ultra stealth is “only available on enterprise plans”, no extra cost is stated, and proxies are recommended but not required. Stealth docs. Its CAPTCHA docs list manual types (turnstile, cloudflare-challenge, aliexpress, recaptcha, amazon) and warn that “Some sites require proxies”. CAPTCHA docs.
Neither lists a price per CAPTCHA solve. Browserbase shows solving as a “Yes” on paid plans; Hyperbrowser shows it as “Automatic”. I’d treat both as included until a bill says otherwise.
One cost tip from Browserbase applies to both: blocking images cuts proxy bandwidth, but the guide says not to do it on bot-protected sites. Cost guide.
What about Fetch, Search and agents? #
These side products price very differently, and they can matter more than browser-hours. Browserbase’s Fetch skips the browser and is cheaper; Hyperbrowser’s Search is a flat $5 per 1,000 while Browserbase’s depends on the provider.
| Endpoint | Browserbase | Hyperbrowser |
|---|---|---|
| Fetch, plain | 1,000 included (Free, Developer), 10,000 (Startup); then $1 per 1,000 (Developer) or $0.50 (Startup); no browser | 1 credit a page, $1 per 1,000; loads in a cloud browser |
| Fetch with proxy | $4 per 1,000 | 10 credits a page, $10 per 1,000 |
| Fetch with structured output | $4 per 1,000 with Extract, $7 with proxies and Extract | JSON adds 5 credits, $5 per 1,000 |
| Search | 1,000 included; then $5 per 1,000 by default, $1 to $12 by provider | 5 credits, $5 per 1,000; 10 credits with location |
| Agents | 3, 15 or 50 runs included; overage not published | 20 credits a step ($0.02) plus browser time |
Sources: Browserbase pricing, Hyperbrowser pricing, pricing reference, Hyperbrowser Fetch, verified 2026-11-16.
Browserbase launched Fetch on March 11, 2026 at “$1 per 1,000 pages”, with “no browser session required”. Fetch post. Hyperbrowser’s Fetch, by contrast, “loads a URL in a cloud browser”. Fetch docs.
Browserbase’s Search price needs a careful read. The pricing page lists Parallel Fast at $1, Parallel Advanced at $5, Exa Fast at $7 and Exa Deep at $12 per 1,000, with $5 as the default.
Parallel arrived on October 14, 2026 with Advanced as the default mode. The plans doc still says $7, so I trust the newer pricing page. Pricing, changelog, plans doc.
Worked examples (my arithmetic, marginal cost on top of the plan you’re already on):
- 100,000 fetches. Browserbase Startup: 90,000 × $0.50 per 1,000 = $45, or $400 with proxies. Hyperbrowser: $100, or $1,000 with a proxy. Browserbase doesn’t say whether proxied calls draw from the 10,000 included.
- 10,000 searches. Browserbase: 9,000 × $5 per 1,000 = $45 at the default, $9 on Parallel Fast, $108 on Exa Deep. Hyperbrowser: $50, or $100 with location.
A few extras round it out. Hyperbrowser charges $30 per million output tokens for AI Extract (0.03 credits a token) and runs sandboxes at 45 credits per vCPU-hour and 15 per GiB-hour. Browserbase includes $5 of model tokens on Free and bills paid plans pay-as-you-go at market price, with its Functions runtime included on every plan. Hyperbrowser reference, Hyperbrowser pricing, Browserbase pricing.
How many browsers, for how long, and where? #
Concurrency costs about the same; session length and regions are where Browserbase publishes more. That’s why it gets my tie-break.
| Limit | Browserbase | Hyperbrowser |
|---|---|---|
| Browsers at once (free / entry / mid / top) | 3 / 25 / 100 / 250+ | 1 / 25 / 100 / 1,000+ |
| Price of 25 browsers | $20 | $30 |
| Price of 100 browsers | $99 | $100 |
| New sessions per minute | 5 / 25 / 50 / 150+ | Not published |
| Maximum session | 15 min free, 6 h paid, 6+ h Scale | Not published |
| Regions | 4: us-west-2 (default), us-east-1, eu-central-1, ap-southeast-1 | 5: us-central, us-east, us-west, europe-west; asia-south on Enterprise and Select only |
| Retention | 7 / 30 / 30 / 30+ days | 7 / 30 / 30 / 180+ days |
Sources: Browserbase plans doc, multi-region guide, Hyperbrowser pricing, Hyperbrowser regions, verified 2026-11-16.
Session length. Browserbase’s timeouts page says it plainly: “The maximum session duration is 6 hours.” Timeouts.
Hyperbrowser’s timeoutMinutes overrides a team default, but the docs give no minimum, maximum or default value. Parameters. If you run long agent sessions, a known ceiling is worth something.
Regions. Browserbase runs browsers in Singapore with no plan restriction stated. Hyperbrowser’s only Asian region, asia-south, is “only available on Enterprise and Select plans”, and its docs don’t say which region is the default. Parameters, regions.
Session creation. Browserbase caps how fast you can open sessions (5 to 150+ a minute by plan). If you burst thousands of short jobs, that cap may bind before the concurrency does.
Hyperbrowser has the longer retention at the top (180+ days on Enterprise) and records sessions with rrweb by default, with MP4 video off by default. Parameters.
What do the free tiers really give you? #
Hyperbrowser gives you far more browser time; Browserbase gives you more browsers at once and a taste of its other APIs.
- Browserbase Free: 1 browser-hour, 3 browsers at once, 15-minute sessions, 1,000 Search calls, 1,000 Fetch calls, $5 of model tokens and 7-day retention. No CAPTCHA solving and no proxies. Pricing, plans doc.
- Hyperbrowser Free: 5,000 credits, which is 50 browser-hours at one browser at a time, with 7-day retention. “Proxy usage and CAPTCHA solving require a paid plan.” Pricing, parameters.
Browserbase’s free concurrency rose from 1 to 3 between late December 2025 and late March 2026, according to a pricing-change tracker whose own dates don’t fully agree. PricingSaaS. Pages that still say 1 are out of date.
For testing whether your script works at all, I’d start on Hyperbrowser’s 50 hours. For testing parallel behaviour or Fetch and Search, Browserbase’s free plan is the better sandbox. Neither free plan lets you test a proxied, CAPTCHA-protected target.
Does the framework lock you in? #
No. Both vendors’ agent frameworks run without the vendor’s cloud; the real difference is the licence.
Stagehand is Browserbase’s framework, MIT-licensed, with 26.1k GitHub stars. Its README says “No LLM key or Browserbase account needed for local use”. Stagehand.
Browserbase shipped Stagehand 4.1 to 4.4 between September 21 and November 5, 2026, alongside Pause & Resume for agent runs and Authenticated Fetch. Changelog.
HyperAgent is Hyperbrowser’s, with 1.6k stars. It runs locally, and Hyperbrowser is an optional browserProvider. HyperAgent. Its licence is the GNU AGPL v3, copyright S2 Labs Inc. LICENSE.
MIT lets you do almost anything; AGPL is a copyleft licence, so I’d have it reviewed before shipping a modified copy inside a product. Hyperbrowser also prices Browser Use steps and computer-use models, so you aren’t tied to HyperAgent there either. Pricing reference.
If you’re still choosing a framework, Browser Use vs Stagehand compares the control loops, and the best cloud browsers for AI agents covers the wider field.
Who are you buying from? #
Two very different companies. Browserbase raised a $40M Series B led by Notable Capital at about a $300M valuation in June 2025, per SiliconANGLE. Hyperbrowser is a Y Combinator Summer 2021 company in San Francisco with a listed team size of 4. YC.
Neither pricing page publishes an uptime SLA. Hyperbrowser’s own comparison blog claims “99.9%+”, which I couldn’t verify. Hyperbrowser blog.
The only outside timing data I found is a small-sample third-party run from Helsinki, updated May 31, 2026, with 10 measured sessions per provider for timing. It measured an average total of 11,933 ms on Browserbase (9,401 ms to create the session) against 4,012 ms on Hyperbrowser (1,462 ms to create). Tech Stackups. It isn’t ours and the sample is small, so I read it as a hint about startup time, not a ranking.
User opinion is scarce. Skyvern’s Hyperbrowser review page gives no prices and no user reviews, and I found no Hyperbrowser reviews elsewhere. Skyvern review page.
What do other comparisons get wrong? #
Every ranking page I read had at least one stale or missing price, and none added up a bill.
Corrections, checked on November 16, 2026
- Skyvern still prints Browserbase at “$39/month for 200 browser hours” on a page labelled “Updated Nov 11, 2026”. Today it’s Developer at $20 for 100 hours and Startup at $99 for 500. Skyvern
- Notte gives Browserbase an hourly overage of “implied ~$0.20-0.40” and Hyperbrowser 12 regions. The published overage is $0.12 or $0.10, and Hyperbrowser’s docs list 5 regions. Notte
- Hyperbrowser’s own blog lists its Startup and Scale concurrency as “Not published” and its free tier as “~1,000 credits”. Its pricing page says 25 and 100 browsers and 5,000 free credits. It also gives Browserbase’s Series B as $67.5M; SiliconANGLE reported $40M. Hyperbrowser blog
- AgentDeals lists Hyperbrowser as “Pay-per-use” and gives no free-tier limits (“We are not publishing a free-tier verdict for Hyperbrowser”). The limits are published: 5,000 credits, 1 browser, 7-day retention. AgentDeals
- Decryption Digest calls Browserbase pricing “Not published as a flat list”. It’s on browserbase.com/pricing with hours, GB and overage. Decryption Digest
- MCP.Directory defers every Hyperbrowser price cell to the vendor’s page, though its Browserbase rows were right as of May 11, 2026. MCP.Directory
- TinyFish lists Browserbase Search at “$7 per 1,000”. That’s the plans-doc figure; the pricing page now says $5 by default. TinyFish
One correction runs against a common verdict too. “Hyperbrowser has the lower price per hour” is true only below the allowances or for work without proxies. Past them, both charge $0.10 and $10.
What neither vendor publishes
- How Hyperbrowser meters browser time, its per-session minimum (if any), its maximum session length and its default timeout.
- A per-solve CAPTCHA price on either side.
- Which way Browserbase rounds a partial minute.
- Browserbase Scale prices, agent-run overage and Model Gateway markup; Hyperbrowser Enterprise rates.
- An uptime SLA on either pricing page.

Which one should you pick? #
Heavy browser-only work with no proxies: Hyperbrowser. At 1,000 hours it’s $100 against $149 on Browserbase Startup ($128 on Developer if 25 browsers are enough), because you’d be paying Browserbase for 5 GB of proxy you don’t use.
Small jobs that need CAPTCHA solving, up to about 183 hours a month: Browserbase Developer at $20. It includes CAPTCHA solving and 1 GB of residential proxy; Hyperbrowser’s cheapest plan with either is $30.
Proxy-heavy scraping at scale: Browserbase. The bills tie ($399 against $400 at 2,000 hours and 20 GB, $699 against $700 at 5,000), so I’d take the vendor that publishes a 6-hour session cap, offers Singapore on any plan and charges $4 per 1,000 for proxied Fetch instead of $10.
Thousands of sessions under a minute: Hyperbrowser, on the published rules, since Browserbase bills each session at least a minute. Confirm the metering on the free credits first, because the bill ranges from $55.56 to $166.67 depending on it. If you’d rather stay on Browserbase, reuse sessions with keep-alive.
Trying one for free: Hyperbrowser Free for 50 hours of single-browser time; Browserbase Free if you need 3 browsers in parallel or want to try Search and Fetch.
Built on Stagehand: Browserbase, for the native fit. Stagehand still runs elsewhere, so it isn’t a trap.
If I were starting today, I’d price my month with the bills table above, start on the free tier of the vendor that wins, and read the usage page after a week. Then I’d pick the plan whose included hours and gigabytes I actually burn. For other options, see Browserbase alternatives or Browserbase vs Steel.
FAQ
Is Hyperbrowser cheaper than Browserbase?
Sometimes. Past the included allowances both charge $0.10 per browser-hour and $10 per GB of proxy traffic (Browserbase Startup against any paid Hyperbrowser plan), so at 2,000 hours and 20 GB the bills are $399 and $400. Hyperbrowser is cheaper for browser-only work (1,000 hours is $100 against $149 on Browserbase Startup) and Browserbase Developer is cheaper for small proxied jobs up to about 183 hours. Prices verified 2026-11-16.
Does Browserbase charge a minimum per session?
Yes. Its billing docs say browser time is billed by the minute with a one-minute and one-MB minimum per session, so a 20-second session bills a full minute. Keep-alive sessions on paid plans let you reuse one browser for many short jobs to avoid that minimum.
Do Hyperbrowser credits expire?
Plan credits reset at each renewal with no carry-over. Credits you buy on top, as a one-time purchase or through auto-reload, expire after 12 months, according to Hyperbrowser's pricing page and docs.
Which one includes CAPTCHA solving on the cheapest paid plan?
Both, but Browserbase's cheapest paid plan costs less. Browserbase Developer at $20 a month includes CAPTCHA solving; Hyperbrowser needs Startup at $30, because proxies and CAPTCHA solving require a paid plan. Neither lists a per-solve price.
How much do proxies cost on Browserbase and Hyperbrowser?
Hyperbrowser charges 10,000 credits per GB, which is $10, on every plan except Enterprise, with no proxies on Free. Browserbase includes 1 GB on Developer ($12 per GB after) and 5 GB on Startup ($10 per GB after), with a 1 MB minimum per proxied session. Verified 2026-11-16.
How long can a Browserbase or Hyperbrowser session run?
Browserbase publishes a cap: 15 minutes on Free, 6 hours on Developer and Startup, and 6+ hours on Scale. Hyperbrowser publishes no maximum; its timeoutMinutes setting overrides a team default, and the docs give no minimum, maximum or default value.
Which regions do Browserbase and Hyperbrowser offer?
Browserbase lists four: us-west-2 (the default), us-east-1, eu-central-1 and ap-southeast-1 (Singapore), with no plan restriction stated. Hyperbrowser lists five: us-central, us-east, us-west, europe-west and asia-south, and asia-south is only available on Enterprise and Select plans.
Sources
37 sources, accessed .
Official pricing, docs, changelogs and status pages 22
- Browserbase pricing
- Browserbase docs: plans and billing
- Browserbase docs: session timeouts
- Browserbase docs: keep-alive sessions
- Browserbase docs: cost optimisation
- Browserbase docs: proxies
- Browserbase docs: stealth mode and Verified
- Browserbase changelog: Advanced Stealth (Jan 17, 2025)
- Browserbase docs: multi-region
- Browserbase changelog
- Browserbase blog: Fetch API launch (Mar 11, 2026)
- Hyperbrowser pricing
- Hyperbrowser docs: pricing reference (credit rates)
- Hyperbrowser docs: pricing.md (billing rules)
- Hyperbrowser docs: session parameters
- Hyperbrowser docs: session lifecycle
- Hyperbrowser docs: regions
- Hyperbrowser docs: proxies
- Hyperbrowser docs: CAPTCHA solving
- Hyperbrowser docs: stealth mode
- Hyperbrowser docs: Fetch
- Hyperbrowser blog: Hyperbrowser vs Browserbase (vendor's own comparison)
GitHub code, issues and releases 3
Independent benchmarks and published studies 1
Review platforms 1
Community discussions 1
News and press 1
Other blogs 6
- Skyvern: Browserbase vs Hyperbrowser (rival vendor)
- Skyvern: Hyperbrowser reviews and pricing (rival vendor)
- Notte: Browserbase vs Hyperbrowser (rival vendor, AI-generated)
- Decryption Digest: Browserbase vs Hyperbrowser vs Steel
- MCP.Directory: four-vendor browser comparison
- TinyFish: Browserbase pricing (rival vendor, Aug 7, 2026)
Last updated: 16 November 2026. Researched and drafted with AI tools; human editorial review and publication approval are pending.


