Skip to content
CrawlfolioSourced research on web data for AI
Menu

Scrapfly sells credits, and a page costs anywhere from 1 credit to 30 or more. So the $30 Discovery plan’s 200,000 credits buy 200,000 plain pages, 33,333 rendered pages or just 6,667 protected ones. Pricing, billing docs, verified 2026-11-16.

Your decision is which plan fits your mix of pages, and whether Scrapfly is the cheap choice for the protected sites you care about. Below I turn credits into pages and dollars for each plan, show the worst-case bill on every plan, and price three 100,000-page jobs against ScrapingBee, ZenRows and Scrape.do.

Short on time?

Short on time? Here's my pick by page mix

Just trying it
Free
1,000 credits once, no card, no expiry. Spend them on your hardest target first: that's about 33 protected pages.
Plain HTML, up to 200K pages a month
Discovery, $30
$0.15 per 1,000 plain pages and a hard stop at the quota, so a bad month can't surprise you.
Rendered pages, up to about 238K a month
Pro, $100
166,667 rendered pages in the quota (or 1M plain), and pay-as-you-go stays cheaper than Startup up to about 1.43M credits. Worst case $275.
Protected targets, about 48K to 125K pages
Startup, $250
100,000 protected pages come to $350 with pay-as-you-go, and the bill can't pass $500.
Over 3.75M credits a month
Enterprise, $500
$0.09 per 1,000 credits in the quota and a $830 ceiling. Beyond 8.25M credits you're into Custom pricing.
Mostly protected pages, tight budget
ScrapingBee or Scrape.do
Both list 100,000 protected pages at $249 against $350 on Scrapfly. Pick Scrapfly only if its success on your target is the reason.

Prices verified . Sponsors cannot buy a verdict or a position.

Scrapfly pricing runs from a free plan with 1,000 one-time credits to Discovery at $30 a month (200,000 credits), Pro at $100 (1 million), Startup at $250 (2.5 million) and Enterprise at $500 (5.5 million). Free and Discovery stop at the quota; Pro, Startup and Enterprise switch to pay-as-you-go, capped by default at 50% of the quota. Here’s the full ladder, Custom included.

Scrapfly plans, monthly billing

Verified

PlanPrice a monthCreditsPer 1K creditsPAYG per 1K afterPAYG cap (extra credits)Worst-case billConcurrentLog retention
Free$01,000 oncen/aNone (hard cap)0$05Not stated
Discovery$30200,000$0.15None (hard cap)0$3051 week
Pro$1001,000,000$0.10$0.35500,000$275202 weeks
Startup$2502,500,000$0.10$0.201,250,000$500503 weeks
Enterprise$5005,500,000$0.09$0.122,750,000$8301004 weeks
Custom$1,200 to $30,000+Negotiatedn/aNegotiatedUncappedn/aCommittedCustom

Source: Scrapfly pricing page, pricing.md and billing docs, USD. PAYG is listed per 10,000 credits ($3.50, $2.00, $1.20); I show it per 1,000. The worst-case bill is my arithmetic on the 50% PAYG cap.

This page sits in the scraping API hub. If credit systems are new to you, how scraping API credits work covers the general idea; here I stick to Scrapfly’s numbers.

What does one Scrapfly request cost in credits? #

One credit for a plain page on a datacenter IP, and it climbs from there. Rendering adds 5, a residential IP costs 25 instead of 1, and protected sites start at 30. Billing docs, verified 2026-11-16.

Every Scrapfly product draws on the same pool: one API key and one credit balance covers the Web Scraping API, Cloud Browser, Screenshot, Extraction and Crawler. pricing.md. Here’s what each piece costs, from Scrapfly’s own docs:

What you ask for Credits Notes
Request on a datacenter IP 1 70 countries
Request on a residential IP 25 Replaces datacenter (“mutually exclusive”); 77 countries
Request on the Tor pool 5 21 countries; added May 29, 2026
JavaScript rendering +5 6 on datacenter, 30 on residential
Cache hit inside the TTL 1
Screenshot 60 +1 per 100 KB above 4 MB
Extraction 1 (template), 5 (prompt or model) More per extra 500 KB; a 1 MB prompt is 10
Cloud Browser 1 per 30 seconds Minimum 5 per allocation, plus bandwidth
CAPTCHA solving 5 (interaction), 20 (token) Failures free
Crawler search / prompt 1 / 3 Each crawled page bills as a scrape

Sources: Scrape API billing, proxy pools, screenshot, extraction, Cloud Browser, crawler, release notes. No page I opened mentions a surcharge for picking a country.

The bandwidth surcharges #

Big responses cost more. Text responses are surcharged above 1 MB, binary files bill per 100 KB after the first 1 MB (3 credits on datacenter, 10 on residential), and browser rendering includes 3 MB. Scrapfly’s own example: a 5 MB PDF over a datacenter IP costs 120 credits. Billing docs.

Cloud Browser bandwidth is priced per MB too: 7 to 10 credits on datacenter and 52 to 78 on residential, depending on plan. For residential traffic that works out to $7.99 a GB on Discovery and Pro, $6.66 on Startup and $6.05 on Enterprise. Cloud Browser billing.

What changed in 2026 #

Mostly new line items. The 2026 release notes show Cloud Browser going generally available on April 8, the Batch API arriving as a paid-only feature with Classify at 1 credit on April 19, CAPTCHA solving at 5 or 20 credits with free failures on April 23, and the Tor pool at 5 credits on May 29. Release notes.

Price changes, if they come, take effect at the end of a billing cycle, so a mid-month change can’t hit a bill you’re already running. Terms, §07.

The crawler’s free parts #

Crawling is billed page by page at the same rates, but some of it is free: robots.txt and sitemap fetches, duplicate pages and cached pages cost nothing, and max_api_credit stops a crawl at a budget. Crawler billing.

Two controls worth setting on day one #

Every response reports what it cost in the X-Scrapfly-Api-Cost header and in context.cost. You can also set cost_budget to cap what a single request may spend, though it works only on settings that are known in advance, because bandwidth can’t be predicted. Billing docs.

Rendering is the biggest single lever: it makes a page six times dearer on a datacenter IP. If you’re not sure your target needs it, my JavaScript rendering check shows how to tell before you pay for it.

So how many pages does each plan buy? #

Far fewer than the credit count suggests once pages need rendering or protection. Here’s each plan’s allowance divided by the credits a page costs (my arithmetic, verified 2026-11-16):

Plan Plain (1 credit) Rendered (6) Residential (25) Protected (30)
Free 1,000 166 40 33
Discovery, $30 200,000 33,333 8,000 6,667
Pro, $100 1,000,000 166,667 40,000 33,333
Startup, $250 2,500,000 416,667 100,000 83,333
Enterprise, $500 5,500,000 916,667 220,000 183,333

“Protected” here means residential plus rendering at 30 credits, which Scrapfly’s own comparison page gives as the floor for the Unblocker. The real cost on a hard target can be higher, as the next section explains.

And here’s what 1,000 pages cost, inside the quota and once pay-as-you-go kicks in:

Plan Plain Rendered Residential Protected
Discovery, in quota $0.15 $0.90 $3.75 $4.50
Pro or Startup, in quota $0.10 $0.60 $2.50 $3.00
Enterprise, in quota $0.09 $0.55 $2.27 $2.73
Pro, pay-as-you-go $0.35 $2.10 $8.75 $10.50
Startup, pay-as-you-go $0.20 $1.20 $5.00 $6.00
Enterprise, pay-as-you-go $0.12 $0.72 $3.00 $3.60

Two things jump out. Pro and Startup cost the same per credit inside the quota ($0.10 per 1,000), so Startup is only better value once you’d otherwise pay Pro’s overage. And Pro’s pay-as-you-go rate is three and a half times its in-quota rate, so running far past the quota on Pro gets expensive fast.

A pale tiled facade with staggered round windows in thin metal rims, some showing dark curtains and a few lighter glass
Many windows, one wall: a plan's credits are the wall, and how many pages it holds depends on what each page needs. Photo: Jon Tyson / Unsplash · Unsplash License

What does the Unblocker really cost? #

Nobody outside Scrapfly can say exactly. The Unblocker, the feature that gets past anti-bot systems, has three different price signals on Scrapfly’s own pages, and none is a fixed number.

The Unblocker is the renamed ASP; Scrapfly says “Only the documented name changed”. Here’s what its pages say about cost:

  • The docs: it’s “totally free on non-blocked scrape”, it may “upgrade to a better general proxy pool”, and “Specific target/shield have fees and are not publicly documented”. The cost “may fluctuate”. Unblocker docs, ASP docs.
  • The plan card lists “5 credits” for JS rendering or the Unblocker. Pricing.
  • Scrapfly’s comparison page says “Scrapfly Unblocker costs 30+ credits (varies by target)”, with datacenter plus JS at 6 and residential plus JS at 30. Scrapfly vs ScraperAPI.

I’d read those together like this. On a page that isn’t blocking you, the Unblocker adds nothing. When it has to upgrade to residential and render, you’re at 30 credits, and specific shields add a fee you can’t see in advance.

So I’d treat 30 credits as the floor for a protected page and budget for more. The way to learn your real number is the X-Scrapfly-Api-Cost header on your own target, with cost_budget set so one stubborn page can’t empty the account.

Do failed requests cost anything? #

Usually not, and that’s a real point in Scrapfly’s favour. The plan card says “Failed request $0, never charged on error”, and the comparison page says “Failed requests don’t cost credits”. Pricing, comparison.

The docs add the fine print. Scrape Failed Protection means failed scrapes aren’t billed, but a listed set of status codes is excluded (400 to 418 except 403 and 408, plus 422, 424, 426, 428 and 456), so those are charged. Billing docs.

There’s also a fair-use switch. If 30% or more of your scrapes over 24 hours (minimum 1,000) are blocked while you’re not using the Unblocker, the protection is turned off. Scrapfly rechecks after 30 days and restores it once the blocked share is back under 30%. Billing docs.

The terms use a different measure. They let Scrapfly charge or suspend “if failed request represent more then twenty percent of the quota volume”. Terms, §05. The two thresholds don’t match, so I’d stay well under both.

Since October 24, 2026, the dashboard shows each log’s cost in USD and turns the Blocked figure red once blocked requests without the Unblocker pass the fair-use limit. Release notes. That’s the number to watch if you scrape hard targets without the Unblocker.

What happens when your credits run out? #

It depends on the plan. Free and Discovery stop; Pro and above keep going at pay-as-you-go rates until a cap. Scrapfly puts it as “Discovery and Free hard-cap at quota for predictable bills” and “Pro and above switch to pay-as-you-go when included credits are consumed”. pricing.md, verified 2026-11-16.

Pay-as-you-go costs $3.50 per 10,000 credits on Pro, $2.00 on Startup and $1.20 on Enterprise, billed in 10,000-credit batches. It’s capped at 50% of your monthly quota by default; Scrapfly’s example is a 1M quota allowing 500K extra. Pricing, billing docs.

That cap gives every plan a maximum bill (my arithmetic):

Plan Extra credits allowed Most you can spend on top Worst-case month
Pro 500,000 500,000 × $0.35 per 1K = $175 $275
Startup 1,250,000 1,250,000 × $0.20 per 1K = $250 $500
Enterprise 2,750,000 2,750,000 × $0.12 per 1K = $330 $830

Hit the cap and the API returns ERR::ACCOUNT::SUSPENDED with HTTP 429 until the cycle renews or you upgrade. Custom plans aren’t capped. Billing docs, FAQ.

Quotas reset at renewal, with no rollover. Pricing. Concurrency is a separate limit: the FAQ says going over it causes failed requests, and the read timeout is 155 seconds. FAQ.

One inconsistency to know about: pricing.md also lists Discovery at $5.00 in its “Extra credits (per 10k)” column, on the same page as the hard-cap sentence. The HTML card says “No pay-as-you-go” for Discovery. I’d trust the card and the hard cap.

Six round dark windows set in a weathered beige mosaic wall, arranged in two loose rows and divided by thin panel joints
A wall with a fixed number of openings: the pay-as-you-go cap works the same way, setting a ceiling on the bill that you can work out before the month starts. Photo: Jon Tyson / Unsplash · Unsplash License

When should you move up a plan? #

At about 1.43 million credits a month from Pro to Startup, and at 3.75 million from Startup to Enterprise. Discovery to Pro isn’t a choice: Discovery stops at 200,000 credits, so the 200,001st credit needs Pro.

The break-evens, my arithmetic on list prices:

Move Break-even Plain pages Rendered pages Protected pages
Discovery to Pro 200,000 credits (forced) 200,000 33,333 6,667
Pro to Startup about 1,428,571 credits about 1.43M about 238,000 about 47,600
Startup to Enterprise 3,750,000 credits 3.75M 625,000 125,000

Pro to Startup: $100 + $0.35 per 1,000 × (credits − 1,000,000) = $250 gives about 1,428,571 credits. Below that, Pro plus overage is cheaper even though Startup has more credits.

Startup to Enterprise: $250 + $0.20 per 1,000 × (credits − 2,500,000) = $500 gives exactly 3,750,000, which is also Startup’s pay-as-you-go cap. Startup can’t go past it, so the switch is forced at the same point.

That’s where my picks come from. Rendered pages up to about 238,000 a month belong on Pro, and protected pages between about 48,000 and 125,000 belong on Startup.

What else changes between plans #

The bigger plans also give you more of everything around the credits: 5, 20, 50 or 100 concurrent requests; logs kept 1, 2, 3 or 4 weeks; 2, 5, 15 or 50 projects; and 5, 100, 200 or 500 schedules (Discovery to Enterprise). Priority email support starts at Pro. pricing.md.

No SLA is published on any plan. Scrapfly lists SOC 2 Type II and ISO 27001, with a BAA only on Custom. Custom plans run “$1,200 to $30,000+” a month. pricing.md.

What about annual billing? #

The pricing file says annual billing gives “2 months free (16% off) when paid annually”. Neither copy of the page shows annual dollar amounts. pricing.md.

If “2 months free” means paying for 10, the years come to $300, $1,000, $2,500 and $5,000, or $25.00, $83.33, $208.33 and $416.67 a month (my arithmetic). That’s 16.7% off, not 16%. Check the real figure at checkout before you commit.

What would my bill be? #

Here are three 100,000-page jobs and a scale check at one million pages. Each is hypothetical, priced on the cheapest plan that fits, from list prices verified 2026-11-16 (my arithmetic, not invoices):

Job a month Credits Plan Bill Per 1,000 pages
100,000 plain pages 100,000 Discovery $30 $0.30
100,000 rendered pages 600,000 Pro $100 $1.00
100,000 protected pages 3,000,000 Startup + PAYG $350 $3.50
1M plain pages 1,000,000 Pro $100 $0.10
1M rendered pages 6,000,000 Enterprise + PAYG $560 $0.56
1M protected pages 30,000,000 Custom Not published n/a

100,000 plain pages #

100,000 credits fit Discovery’s 200,000 with half to spare: $30. Free’s 1,000 credits don’t come close. Because Discovery hard-caps, $30 is also the most this month can cost.

100,000 rendered pages #

At 6 credits each, that’s 600,000 credits. Discovery can’t hold it, so it’s Pro at $100, with 400,000 credits of headroom before overage starts.

100,000 protected pages #

At 30 credits each, that’s 3,000,000 credits. Pro can’t reach it, because its ceiling is 1.5M including pay-as-you-go.

Startup includes 2.5M, and the other 500,000 cost 50 batches of 10,000 at $2.00: $100. The bill is $350.

Enterprise would cost $500 with plenty of headroom. If the Unblocker adds per-target fees, the Startup bill rises by an amount Scrapfly doesn’t publish, up to its $500 ceiling.

The one-million-page check #

1M plain pages is exactly Pro’s quota: $100. 1M rendered pages is 6M credits, past Startup’s 3.75M ceiling, so Enterprise: $500 + 500,000 × $0.12 per 1,000 = $560.

1M protected pages is 30M credits, far past Enterprise’s 8.25M ceiling, so it’s a Custom plan with no public price.

A mixed month #

Most real jobs mix page types, and the mix decides the plan. Say you scrape 50,000 plain pages, 20,000 rendered pages and 5,000 protected pages in a month (a hypothetical mix).

That’s 50,000 × 1 + 20,000 × 6 + 5,000 × 30 = 50,000 + 120,000 + 150,000 = 320,000 credits. The 5,000 protected pages are under 7% of the pages but almost half the credits (my arithmetic).

320,000 credits is past Discovery’s hard cap, so the plan is Pro at $100, with 680,000 credits spare. Drop the protected pages and the same month fits Discovery at $30. When you estimate, count the protected pages first; they move the bill more than anything else.

Is Scrapfly cheaper than its rivals? #

For plain and rendered pages, it’s at or near the cheapest. For protected pages it’s mid-pack: $350 against $249 at ScrapingBee and Scrape.do, though under ZenRows at $399.

Same three jobs, each on the cheapest list plan that fits, verified 2026-11-16:

100,000 pages a month Scrapfly ScrapingBee ZenRows Scrape.do
Plain $30 (Discovery) $49 (Freelance) $39 (Build, 120K rung) $29 (Hobby)
Rendered $100 (Pro) $99 (Startup) $99 (Launch, 500K rung) $99 (Pro)
Protected (residential + JS) $350 (Startup + PAYG) $249 (Business) $399 (Growth, 3M rung) $249 (Business)

Sources: ScrapingBee, ZenRows, Scrape.do and its request costs. These are page counts at list price, not success rates, and the cross-vendor ranking lives in the cheapest web scraping API.

The protected gap comes almost entirely from one number. ScrapingBee, ZenRows and Scrape.do charge 25 credits for residential plus rendering; Scrapfly charges 30. At 25 credits, 100,000 pages would be exactly Startup’s 2.5M credits, a flat $250 (my arithmetic).

A few details from each rival’s page shape the comparison:

  • ScrapingBee renders JavaScript by default, so its plain price assumes you switch rendering off. Its prices exclude VAT. See ScrapingBee pricing.
  • ZenRows says failed requests are never charged. Each tier has several monthly rungs, and the table uses the cheapest rung that fits. See ZenRows pricing.
  • Scrape.do bills only successful calls, and per-domain overrides charge the stricter profile. See Scrape.do pricing.

What does outside data say about Scrapfly’s success rate? #

One tracker puts Scrapfly first. Scrapeway’s October 1 to November 1, 2026 run shows 95.3% success, a 16.3-second average and $3.75 per 1,000 requests. Scrapeway.

The spread by target is wide: $0.60 per 1,000 on Twitter, $1.35 on Booking, $1.78 on Amazon (93% success), $5.78 on Indeed and $16.05 on LinkedIn (94%), with Instagram at 75% success. Scrapeway doesn’t disclose who runs it, and its about page returned 404, so I’d treat it as context, not proof.

Its $3.75 average sits inside my $3.00 to $4.50 range for protected pages in quota, but Scrapeway doesn’t say which plan it prices on. If Scrapfly’s success on your specific target is higher, that can be worth more than the $101 gap.

What’s in the free plan? #

1,000 credits, given once. Scrapfly calls them “1,000 credits on signup” with “no credit card, no time limit” and says “Use it forever for prototypes and smoke tests”. You get 5 concurrent requests and can’t buy extra credits on Free. Pricing, pricing.md.

That’s 1,000 plain pages, 166 rendered or about 33 protected (my arithmetic). Because the credits never come back, I’d spend them on the target you’re worried about, not on easy pages that will work anywhere. My guide to testing a scraping API on your own pages shows how to plan the test so free credits go further.

Which billing terms should you read first? #

The ones about money going out. From Scrapfly’s billing docs, verified 2026-11-16:

  • Top-ups: at least $50, and non-refundable.
  • Refunds: only within 30 days and only if you’ve used under 10% of the quota.
  • Cancelling: takes effect at the end of the period.
  • Failed payment: Discovery, Pro and Startup are suspended at once; Enterprise gets 7 days’ grace and Custom 30.

Price changes take effect at the end of a billing cycle with “reasonable prior notice”, and the operator is Joam Intelligence, LLC. Terms.

User feedback on billing is very thin. Trustpilot shows one review, from July 16, 2026: “Very difficult to cancel. Beware signing up for a subscription!” Trustpilot.

One review proves nothing, but it’s a reason to note the cancel-at-period-end rule before you subscribe.

On Hacker News, the price worry is old: a 2023 commenter asked “Do you guys have indie friendly pricing? I don’t have $500/month to spend”. HN. Discovery at $30 answers that today.

July 2026 comments focused on stealth instead. On a thread about a browser-fingerprinting article from scrapfly.dev, one commenter wrote that “their scraping browser fakes the math functions of other browsers”. HN.

In another thread, a commenter cited a stealth browser leaderboard where “ScrapFly is #4 and ZenRows #7”. HN.

Capterra and G2 returned 403 errors and Reddit blocked my reader, so I couldn’t confirm the review scores some pages quote.

What do other pricing pages get wrong? #

Two of the five pages ranking for “scrapfly pricing” get the pay-as-you-go rules wrong, and none says how many pages a plan buys.

Corrections, checked on November 16, 2026

  • Toolradar shifts the pay-as-you-go ladder one plan down: Discovery “$3.50 per 10k”, Pro $2.00, Startup $1.20. Scrapfly’s page says Discovery has none, Pro $3.50, Startup $2.00 and Enterprise $1.20. Toolradar
  • Prospeo says the “PAYG cap defaults to 125% of your monthly quota” and gives a “$437.50 overage” for Pro. The billing docs say 50%, which makes Pro’s worst-case overage $175. Prospeo
  • The Front Desk Review lists the free plan as “1,000 API credits/month”; Scrapfly says the credits come once, with no time limit. Its annual prices (“~$25.20/mo … ~$420/mo”) use 16% off, where “2 months free” works out to $25.00 to $416.67. Front Desk Review
  • APIs.io shows Discovery as “Hard-capped” and with “$5/10,000-credit blocks” side by side, copying the conflict in Scrapfly’s own markdown file; the page itself says it hasn’t been verified against the provider. APIs.io
  • Spider, a rival, has the right multipliers, but one of its totals (“about $3,560”) doesn’t match its own rates, which give $3,440. Spider

What Scrapfly doesn't publish

  • The Unblocker’s per-target fees (“not publicly documented”).
  • Annual dollar prices: only “2 months free”.
  • Whether country targeting costs extra.
  • An SLA on any self-serve plan.
A ribbed metal panel holding six round frosted portholes in screwed steel rings, two of them ringed with dark grime
Six portholes that look alike until you see the grime on two of them: pricing summaries also look alike until you check each number against the source. Photo: Thomas Vogel / Unsplash · Unsplash License

Which plan should you pick? #

Just trying it: Free. 1,000 credits that never expire; spend them on your hardest target first, which is about 33 protected pages.

Plain HTML up to 200,000 pages a month: Discovery at $30. That’s $0.15 per 1,000 pages, and the hard cap means it can never cost more.

JS-rendered pages up to about 238,000 a month, or plain pages up to about 1.4 million: Pro at $100. It holds 166,667 rendered pages in the quota, and its worst case is $275.

Protected targets at about 48,000 to 125,000 pages a month: Startup at $250. 100,000 protected pages come to about $350, and the bill can’t pass $500.

Over 3.75 million credits a month: Enterprise at $500, at $0.09 per 1,000 credits with an $830 ceiling. Past 8.25 million credits, you need Custom.

Mostly protected pages on a budget: ScrapingBee or Scrape.do, which list the same 100,000 protected pages at $249. I’d pick Scrapfly for that job only if its success rate on your target is what you’re paying for.

If I were starting today, I’d spend the free credits on the target I care about and read the cost header on every call. Then I’d set cost_budget and a project budget, and choose the plan from the pages-per-plan table rather than the credit headline.

FAQ

How many pages do 200,000 Scrapfly credits buy?

It depends on the page type. 200,000 credits, Discovery's $30 allowance, buy 200,000 plain datacenter pages at 1 credit, 33,333 JavaScript-rendered pages at 6, 8,000 residential pages at 25, or 6,667 protected pages at 30 credits (my arithmetic on Scrapfly's billing docs, verified 2026-11-16).

Does Scrapfly charge for failed requests?

Usually not. Scrape Failed Protection means failed scrapes aren't billed, apart from a listed set of status codes. But the docs switch that protection off for 30 days if 30% or more of your scrapes over 24 hours (minimum 1,000) are blocked without the Unblocker, and the terms let Scrapfly charge or suspend when failures pass twenty percent of the quota volume.

How much does Scrapfly's Unblocker (ASP) cost?

There's no fixed price. Scrapfly says it is free on scrapes that aren't blocked, the plan card lists 5 credits, its own comparison page says 30+ credits varying by target, and the docs say per-target fees are not publicly documented. Read the X-Scrapfly-Api-Cost header on each call and set cost_budget.

Do Scrapfly credits roll over?

No. Monthly quotas reset at renewal with no rollover. The exception is the free plan's 1,000 credits, which are given once at signup and have no time limit.

Is the Scrapfly free plan monthly?

No. Scrapfly gives 1,000 credits on signup with no credit card and no time limit, and you can't buy extra credits on it. Some third-party pages describe it as 1,000 credits a month; Scrapfly's own pricing page doesn't.

What happens when I go over my Scrapfly credits?

On Free and Discovery, requests stop at the quota. On Pro and above, pay-as-you-go starts at $0.35, $0.20 or $0.12 per 1,000 credits, billed in 10,000-credit batches and capped at 50% of the monthly quota. Past the cap the account is suspended with HTTP 429 until renewal or an upgrade. Worst-case bills are $275, $500 and $830.

Does Scrapfly offer annual billing?

Yes. Its pricing file says annual billing gives '2 months free (16% off)'. It shows no annual dollar amounts, so I can only work them out from that rule: ten times the monthly price, or $300, $1,000, $2,500 and $5,000 a year for Discovery, Pro, Startup and Enterprise.

Sources

29 sources, accessed .

Official pricing, docs, changelogs and status pages 19

  1. Scrapfly pricing page (plan cards) scrapfly.io · accessed
  2. Scrapfly pricing.md (machine-readable pricing) scrapfly.io · accessed
  3. Scrapfly docs: Scrape API billing scrapfly.io · accessed
  4. Scrapfly docs: account billing, PAYG and refunds scrapfly.io · accessed
  5. Scrapfly docs: Scrape API FAQ scrapfly.io · accessed
  6. Scrapfly docs: Unblocker scrapfly.io · accessed
  7. Scrapfly docs: anti-scraping protection (ASP) scrapfly.io · accessed
  8. Scrapfly docs: proxy pools scrapfly.io · accessed
  9. Scrapfly docs: Screenshot API billing scrapfly.io · accessed
  10. Scrapfly docs: Extraction API billing scrapfly.io · accessed
  11. Scrapfly docs: Cloud Browser billing scrapfly.io · accessed
  12. Scrapfly docs: Crawler API billing scrapfly.io · accessed
  13. Scrapfly release notes (2026) scrapfly.io · accessed
  14. Scrapfly terms of service scrapfly.io · accessed
  15. Scrapfly: ScraperAPI alternative page (vendor marketing) scrapfly.io · accessed
  16. ScrapingBee pricing scrapingbee.com · accessed
  17. ZenRows pricing zenrows.com · accessed
  18. Scrape.do pricing scrape.do · accessed
  19. Scrape.do docs: request costs scrape.do · accessed

Independent benchmarks and published studies 1

  1. Scrapeway: Scrapfly success rate and cost, Oct 1 to Nov 1, 2026 scrapeway.com · accessed

Review platforms 5

  1. Toolradar: Scrapfly pricing toolradar.com · accessed
  2. Prospeo: Scrapfly pricing, reviews, pros and cons prospeo.io · accessed
  3. The Front Desk Review: Scrapfly frontdeskreview.com · accessed
  4. APIs.io: Scrapfly plans and pricing (generated) apis.io · accessed
  5. Trustpilot: Scrapfly reviews trustpilot.com · accessed

Community discussions 3

  1. Hacker News: comment asking Scrapfly about indie pricing (Apr 2023) news.ycombinator.com · accessed
  2. Hacker News: comment on the Math.tanh fingerprinting thread (Jul 2026) news.ycombinator.com · accessed
  3. Hacker News: comment citing a stealth browser leaderboard (Jul 2026) news.ycombinator.com · accessed

Other blogs 1

  1. Spider: Spider vs Scrapfly (rival vendor, updated Sep 2, 2026) spider.cloud · accessed

Last updated: 16 November 2026. Researched and drafted with AI tools; human editorial review and publication approval are pending.

What readers say

Used one of the tools in this guide? Tell other readers how it went. I read every review before it goes up, and I never turn one down for being negative. How reviews work.

No reader reviews yet. Yours could be the first.

Write a review
Your rating

What did you use it for, what worked, and what didn't? 30 to 1500 characters. Please don't include links.

Your connection to the company

Your review appears with the name you enter, after I approve it. I don't ask for your email. Privacy.